# How many drops of soapy water can fit on a penny lab report?

The exact number of drops of soapy water that can fit on a penny depends on many factors, such as the size of the penny, the droplet size, the surface tension of the soapy water, and the surface properties of the penny.

For instance, some pennies may have a rougher surface than others, which could allow for more drops of soapy water to fit. Additionally, the amount of soapy water that is on the penny at any given moment may impact how many more drops can be added.

In terms of an experiment, there are several factors to consider if a lab report is desired. First, the size of the penny should be measured. Second, the droplet size should be noted. Third, the surface tension of the soapy water should be tested.

Fourth, the surface properties of the penny should be observed. Finally, these factors can be combined to determine an approximate number of drops of soapy water that can fit on a given penny.

In conclusion, the number of drops of soapy water that can fit on a penny lab report is dependent on a multitude of factors and can only be determined through experimentation.

## How much soapy water can a penny hold?

A penny cannot hold any soapy water as it is a two-dimensional object and its depth is too small to hold any fluid. As an experiment, you could put a penny completely submerged in soapy water, and the water will simply hold the shape of the container it is in, with the penny forming an easily visible imprint.

The soap solution can adhere to the surface of the penny, leaving a residue of soap, but this will not amount to anything more than a thin film. As such, it is impossible to accurately say how much soapy water a penny can hold.

## Why does a penny hold more water than soapy water?

A penny holds more water than soapy water because the surface of a penny is composed of an alloy (a mixture of metals) which is predominantly made up of zinc, making it hydrophilic – which means it is attracted to water.

On the other hand, soapy water, or soap solution, is composed of mostly water mixed with detergents and other surfactants which have been created to have a hydrophobic surface, which means they repel water.

So, because the penny holds an attraction with water molecules, it will generally be able to hold a greater volume of water than soapy water.

## Why do more water drops fit on a penny than rubbing alcohol?

Water and rubbing alcohol are two different molecules that interact differently with the surface of a penny. Water molecules are more polar, meaning that when they come in contact with a penny surface, the negatively-charged oxygen atoms form a stronger bond than the similarly-charged hydrogen atoms of rubbing alcohol.

This allows more water droplets to fit on a penny than rubbing alcohol, as the hydrogen atoms in the rubbing alcohol do not form as strong of a bond with the penny surface, causing them to slip away more easily and take up more space.

Additionally, due to its high surface tension, water’s cohesive forces cause the drops to remain together instead of dispersing and taking up more space. Lastly, water molecules also form hydrogen bonds with each other, while rubbing alcohol molecules do not, which again contributes to water droplets staying connected and accepting up less space than rubbing alcohol.

## How does the coin drop experiment work?

The coin drop experiment is an educational demonstration that is used to teach the basics of physics. The goal of the experiment is to determine the fundamental laws of physics, such as gravity, momentum, and inertia.

The experiment consists of a solid wooden box with a hole cut in the top and a slot below it that can accommodate coins of various sizes. The box is placed on the floor and coins are then dropped from a set height from the top of the box into the slot.

The experiment is used to measure the effects of gravity, momentum and inertia on the coin’s descent and outcome. When the box is first placed on the floor, the gravity of the earth will cause the coin to fall naturally downward.

The speed of the coin’s descent and its final resting place inside the box will be determined by the combination of the momentum the coin has from its initial velocity, the resistance of air, and any other external forces, such as friction.

The outcomes of the experiment will be determined based on the coin’s final resting place in the box. If the coin lands upright in the center of the slot, the experiment is deemed a success. If the coin falls in an unpredictable way, the experiment will be considered a failure.

As participants attempt the experiment with various coins of varying sizes, they will be able to observe the differences in the way the coins move and interact with the forces of the various environmental factors.

## What happens when water drops on a penny?

When water drops on a penny, the water molecules can interact with the copper in the penny to produce a chemical reaction. This reaction can cause the copper atoms on the surface of the penny to start breaking down, producing a compound called copper chloride.

Copper chloride is a blue-green solution that will pool on the surface of the penny. If the penny is left undisturbed and the water continues to evaporate, the water will eventually cause the copper chloride to become a powdery residue that is slightly green in color.

Depending on the temperature and the amount of water droplets on the penny, the reaction can take anywhere from a few minutes to a few hours. When the copper chloride breaks down, it can oxidize and form a thin blue-green patina that helps to protect the copper from further corrosion.

## What is the hypothesis of the penny lab?

The hypothesis of the penny lab is that the temperature of the water will affect the amount of time it takes for a penny to corrode. This lab will test the hypothesis by placing three pennies into three separate cups of water that all have different temperatures; hot, warm, and cold.

It is predicted that the penny placed into the hot water will corrode the fastest, the penny placed into the warm water will corrode the second fastest, and the penny placed into the cold water will corrode the slowest.

After a predetermined amount of time, the pennies will be taken out and evaluated for a scientific comparison and analysis of the results.

## Which side of a penny will hold more drops of water choose the hypothesis?

The hypothesis is that the tails side of a penny will hold more drops of water than the heads side. This is due to the concave shape of the tails side of the penny, which allows it to contain more water and hold more drops of the liquid than the heads side which is convex in shape and is, therefore, not as effectively suited to holding water.

To test this hypothesis, a number of experiments could be done in which different pennies are placed in containers of water. The number of drops on each side can then be counted, and the results can be used to determine which side of the penny holds more water.

## How does surface tension work on a penny?

Surface tension on a penny is the result of intermolecular forces between water molecules that cause them to stick together. When the molecules come into contact with the penny, the surface of the penny acts like a barrier, pushing the molecules together and creating a thin, invisible “skin” on the surface of the water.

Because of this thin film of water, which is held in place by surface tension, the penny actually floats on top of the surface like a tiny boat.

The stronger the intermolecular forces between the molecules of water, the stronger the surface tension. This allows the penny to remain afloat despite its greater density. As the molecules of water move around the surface of the penny and interact with it, some of the energy created by these interactions actually reduces the surface tension of the water, allowing the penny to eventually sink.

## Which property of water allows for the drops to stick to the penny?

The property of water that allows for the drops to stick to the penny is called surface tension. Surface tension is an effect that occurs due to the cohesive forces between the molecules at the surface of a liquid.

The molecules at the surface of the water are more attracted to each other than they are to the molecules surrounding them, resulting in the surface of a liquid becoming like a thin elastic sheet. This creates a surface that is harder to break, which allows the drops to stick to the penny.

The higher the surface tension of the water, the easier it is for the drops to cling to the penny. In addition, the drops can be attracted to the penny due to the forces of adhesion. Adhesion is the attractive force between two different materials and occurs when the molecules interact with the penny’s surface.

This can also help the drops to stick to the penny.

## Why can a penny hold a lot of drops of water?

A penny can hold a lot of drops of water because of the wide surface area and its relatively low surface tension. The copper in pennies is a relatively soft metal that forms nice, flat surfaces. Water has a high surface tension, meaning it naturally forms into balls rather than spreading out flat.

When water is placed on a flat surface like a penny, the capillary action causes the water to spread out evenly and surface tension helps the water hold its shape and stick to the penny. This helps the penny hold a lot more drops of water than a non-metallic surface.

Additionally, the ridges and grooves on the surface of a penny help create additional surface area that can hold water.

## Why is there a difference of the number of drops a coin can hold when water and soap are used explain why?

The difference in the number of drops a coin can hold when water and soap are used is due to the forces of surface tension. Surface tension occurs when molecules of liquids are attracted to each other, which leads to a thin, strong film on the surface of a liquid.

Water has a higher surface tension than soap, which means that molecules in water are more attracted and drawn together, so more water droplets stick to the coin. On the other hand, soap has a lower surface tension – its molecules aren’t as attracted to each other, which means that soap droplets more easily break away from the coin.

Thus, the coin can hold more drops of soap than water.

## How do you do the coin drop trick?

The coin drop trick is an entertaining magic trick that is easy to learn and impress an audience. To perform it, you will need to use two glasses, a coin, and a handkerchief.

Begin by placing the two glasses at a distance of one foot apart on a table. Place the coin in one of the glasses. Place the handkerchief over the top of the glasses, and then take hold of the glass with the coin inside it and lift it up while holding the handkerchief in its place.

Now, let go of the glass and watch the coin drop through the handkerchief and land in the other glass. The audience will be amazed by the trick!.

Once you have mastered the trick, you can add a few flourishes to make it even more spectacular. For example, you can have the audience name a glass for the coin to drop into, or juggle both glasses for a few seconds before raising the one with the coin in it.

There are a variety of options for how you can perform this trick to make it more exciting.

## How did the water make the coin seem to vanish?

When the magician performed the trick with the coin and the water, it was a visual illusion that made the coin appear to have vanished. The magician would have placed the coin inside a glass or mug filled with water, making sure that the coin was completely covered by the surface of the water and could not be seen.

The coin stayed in the mug, hidden from view, while the magician distracted the audience with their hands or a separate object. As the water was slowly poured out of the mug, the coin was slowly revealed and seemed to have vanished and then reappeared.

The illusion was made possible because of the refraction of the light rays on the water’s surface. Light passing through and out of the container was bent and diffracted, making it nearly impossible for viewers to see the coin beneath the surface of the water.

Once the water was no longer present, the refraction effect ceased and the coin was revealed.

This illusion can be exasperated by using a glass container instead of a mug. With a glass, viewers will be able to see the coin through its clear walls, but due to the shape of the container, the coin itself should not be visible to viewers.