Where should I keep my skateboard at home?

Quick Answers

There are a few good options for where to store your skateboard at home. The best places are somewhere out of the way like a closet, garage or storage area. You’ll also want somewhere secure where it won’t get damaged or stolen. Some top choices are:

• In a closet
• In the garage
• In a storage room or shed
• Under your bed
• On a wall-mounted rack

What are the benefits of storing a skateboard in a closet?

Keeping your skateboard in a closet has several advantages:

• Closets provide an enclosed, protected space away from potential weather damage or accidents.
• Most closets have limited access which keeps your board secure from theft.
• Closet space is out of the way so your skateboard won’t be in anyone’s path.
• You can easily access your board when needed.
• No installation required – just stand it up inside.

The main downside is taking up space. But overall, a closet is usually an ideal spot to store a skateboard at home.

What are the pros and cons of storing a skateboard in the garage?

Storing your skateboard in the garage has some advantages but also a few potential drawbacks:

Pros:

• Garages provide plenty of space and storage options.
• You can keep your skateboard up and out of the way by hanging it on the wall or a storage rack.
• Garages are protected from weather damage.
• Usually only limited access to garages so skateboards are protected from theft.

Cons:

• Dirt, dust or moisture in garages could damage the bearings or hardware over time.
• Temperature fluctuations in garages can cause warping of the deck.
• May be inconvenient to access frequently if garage is detached.

Overall, the garage is a viable spot if you take some precautions like wiping down and storing your board properly.

What should I consider when storing a skateboard in a storage room or shed?

Using a storage room, basement or shed to store your skateboard has some pros and cons to think about:

Pros:

• Like garages, storage rooms provide ample shelving and space options.
• Your board will be safely out of the way of foot traffic.
• Minimizes clutter in main living areas.
• Access can be restricted for security.

Cons:

• Storage sheds may not be temperature or humidity controlled leading to potential damage.
• Dust accumulation could build up on bearings and moving parts.
• May not be convenient for frequent access.
• Sheds are higher theft targets than inside storage.

If choosing a shed or storage room, try to keep your skateboard covered, cleaned and maintained. Also be diligent about locking up sheds and restricting access.

What are some pros and cons of storing a skateboard under your bed?

Storing a skateboard under your bed can be convenient but also has some downsides:

Pros:

• Easy, quick access when you want to use it.
• Out of sight and takes up minimal space.
• Avoids clutter in more visible areas.
• Protects it from weather, dirt and accidents.

Cons:

• Exposed to more dust and dirt under the bed which can damage bearings.
• Can slide around and get scratched up on floor over time.
• No security from theft – anyone with bedroom access can take it.
• You have to lift your mattress to get it out.

Storing under the bed works best for easy access but take steps to minimize dust and dirt exposure.

What are the benefits of a wall-mounted skateboard rack?

Wall-mounted skateboard racks offer some great advantages:

• Keeps your board securely off the ground and out of the way.
• Prevents damage from weather, dirt or accidents.
• Easy to access quickly whenever you need it.
• Models with hooks or brackets hold the board in place.
• Creates an interesting, decorative display.
• Usually requires minimal installation.

Wall racks are a smart way to save space while keeping your skateboard accessible and protected.

How can I hang a skateboard on the wall securely?

Here are some tips for securely mounting your skateboard on a wall:

• Use wall anchors rated for the weight of a skateboard (5-10 lbs) in drywall or studs.
• Attach two brackets spaced appropriately apart for the board’s width.
• Place bracket screws into wood studs if possible for maximum strength.
• Angle the brackets slightly down so the board doesn’t slide out.
• Consider hooks, clips or velcro straps to hold up the weight.
• Ensure screws are flush to the wall so the board fits snugly.
• Check for stability by rocking the board back and forth when done.

With the right anchors and secure installation, you can safely store your skateboard on any wall.

What are some creative ideas for skateboard storage and display?

If you want to get creative with how you store or show off your skateboard at home, here are some unique ideas to try:

• Mount multiple boards of different sizes in a geometric or artistic pattern.
• Use hollowed out skateboard decks as shelves.
• Hang wheels on the wall in a shadowbox frame.
• Build a custom cabinet with angled decks as the backing.
• Use old decks as picture frames, clocks or mirrors.
• Create abstract sculptures by bolting decks together.
• Mount boards on the wall to spell out words or names.
• Use railroad spikes or hooks to hang boards on an accent wall.

Let your creativity run wild and come up with artistic or practical ways to show off your boards!

Should I hang my skateboard horizontally or vertically?

You can store a skateboard either horizontally or vertically:

Horizontal

Pros:

• Shows off the graphics and design on the bottom.
• Boards don’t accidentally roll off the wall.
• Takes up less vertical space.

Cons:

• Decks can slowly bow or warp over time.
• More prone to dust buildup.

Vertical

Pros:

• Prevents warping of the deck.
• Less dust accumulates on griptape.
• Boards stack neatly together.

Cons:

• Board could potentially roll and fall.
• Hides view of the bottom graphics.
• Takes up more vertical space.

In general, vertical storage is best for the deck while horizontal shows off the styling. Choose what works best for your space!

How can I prevent my skateboard from getting damaged when stored at home?

To prevent damage to your skateboard when stored at home:

• Keep it out of direct sunlight which can cause fading or warping.
• Avoid excess moisture which deteriorates the wood and bearings.
• Use soft risers to decrease pressure and warping when stacked.
• Keep it away from heat sources like radiators or vents.
• Lay boards flat or store vertically to prevent warping.
• Wipe off any dirt, dust or debris after use.
• Consider covers or bags to minimize scratches.
• Check on boards periodically for any issues.

Proper storage goes a long way towards keeping your skateboard in great shape!

Is temperature or humidity more damaging to a stored skateboard?

Both temperature and humidity pose risks to skateboards in storage but humidity is generally more damaging overall:

Temperature

• High heat can cause decks to bubble, melt or lose structural integrity.
• The glues holding boards together can weaken.
• Griptape may start peeling.

Humidity

• Excess moisture causes wood to swell, warp and crack over time.
• Bearings and metal hardware will rust faster.
• Griptape adhesive can fail.
• Higher risk of mold or rotting of wooden decks.

Ideally, store boards around 60-80°F and keep relative humidity under 45-55%. Dehumidifiers, silica gel packs, or climate-controlled spaces can help when humidity is an issue. Monitor boards closely if large humidity swings are expected.

What are the best ways to protect a skateboard from theft at home?

To deter skateboard theft from your home, some good tips are:

• Store it out of sight in a locked closet, cabinet or shed when not in use.
• Use wall-mounted racks or hooks at higher elevations.
• Install motion sensor lights on sheds or storage buildings.
• Keep garage and shed doors shut and locked.
• Use security cameras to monitor access points.
• Connect boards to immobile objects with skateboard tethers.
• Get renters or homeowners insurance with skateboard coverage.
• Engrave a driver’s license or identification number on the deck.
• Register high-value boards on skateboard registry sites.

Securing your board properly and restricting access when not using it can help deter opportunistic theft. Use common sense and take sensible precautions.

Should I get insurance for my skateboard collection? What does it usually cover?

For valuable skateboard collections, getting insurance can absolutely make sense to protect your investment should boards get stolen or damaged:

Typical coverage:

• Theft – Pays to replace stolen boards and equipment.
• Vandalism – Covers boards that are intentionally damaged.
• Fire damage.
• Flood damage.
• Accidental damage – From impacts, spills, drops, etc.

Other perks:

• Worldwide coverage.
• No deductible.
• Ability to itemize individual boards.
• Covers borrowed gear.

Having an agreed value, serialized inventory, and photos/videos of your collection will help verify claims. Overall, insurance gives valuable peace of mind!

What are some good ways to organize multiple skateboards at home?

If you have several skateboards at home, keeping them organized can be a challenge. Here are some effective ways to arrange multiple boards:

• Wall racks – Space out neat rows of wall-mounted boards.
• By type – Group longboards, cruisers, etc into separate categories.
• By rider – Give each family member their own storage zone.
• Vertically in racks – Use multi-slot upright racks for garages.
• Custom shelves – Build DIY shelving sized just for skateboards.
• Shape patterns – Alternate nose/tail directions for visual appeal.
• Size order – Arrange boards from largest to smallest.
• Usage frequency – Most-used boards get prime/easy access spots.

Get creative with organization methods that keep your gear accessible, protected, and aesthetically pleasing!

Should I store my skateboard deck only or fully assembled? Pros and cons.

You can store a skateboard either fully constructed, or take the deck off the trucks for separate storage. Here are some pros and cons of each approach:

Assembled

Pros:

• Takes up less space than broken down components.
• Nothing to reassemble to go skate.
• Bearings stay evenly compressed in wheels.

Cons:

• More awkward to mount on wall or rack.
• Vulnerable to wheel flat spots if sitting.
• Harder to transport or pack efficiently.

Deck Only

Pros:

• Decks can stand vertically and take up little space.
• Easier to mount deck-only on walls or racks.
• Wheels avoid flat spots.
• Can pack trucks and wheels separately.

Cons:

• Reassembly required to ride.
• Small parts may get lost.
• Bearings may decompress unevenly.

Fully built is best for frequent use while deck-only makes sense for storage efficiency. Choose what works for your specific situation!

Conclusion

Storing your skateboard properly at home is crucial to keeping it in top condition and avoiding damage or theft. Consider where you use it most, storage space options, accessibility, security, and environmental factors like temperature and humidity. Dedicated spaces like closets, wall racks, and storage rooms often work well to keep your board organized, protected, and easily accessible. Take some time to find the right solution for your needs, and your skateboard will deliver years of high performance when you need it.