# How many gallons does the Intex 10×30 pool?

The Intex 10×30 pool is a popular above ground pool that provides 300 square feet of swimming and splashing space. With its large size and affordable price point, this pool is a great option for backyard fun. One common question about the Intex 10×30 pool is how many gallons of water it holds. Knowing the gallon capacity is important for proper pool maintenance and ensuring you have enough water to fill it up.

## Specifications of the Intex 10×30 Pool

To determine the gallon capacity, we first need to look at the specifications of the Intex 10×30 pool:

• Length: 10 feet
• Width: 30 feet
• Height: 32 inches

With dimensions of 10 x 30 x 32 inches, the Intex 10×30 has an interior swimming area of 300 square feet (10 x 30). This is a spacious size for leisurely swimming and playing pool games.

## Calculating the Gallon Capacity

The interior volume of water the pool can hold can be calculated using the pool’s dimensions. Here is the formula:

Gallons = (Length x Width x Average Depth) x 7.5

Where:

• Length = 10 feet
• Width = 30 feet
• Average Depth = 32 inches (2.67 feet)
• 7.5 = the number of gallons in a cubic foot of water

Plugging the dimensions into the formula:

Gallons = (10 x 30 x 2.67) x 7.5

= 8,010 x 7.5

= 60,075 gallons

So the total gallon capacity of the Intex 10×30 pool is approximately 60,075 gallons.

## Does Pool Size Affect Gallons Needed?

An important note is that the overall gallon capacity does not necessarily reflect how much water you need to fill the pool. The manufacturer recommends filling the Intex 10×30 pool with approximately 18 inches of water. Here’s a look at how pool size affects water volume needed:

Pool Size Average Depth Gallons Needed
10×30 18 inches ~18,000 gallons
12×24 18 inches ~13,000 gallons
15×48 18 inches ~30,000 gallons

As shown, the larger the pool dimensions, the more water required to reach proper filling levels. While the 10×30 can hold over 60,000 gallons if filled to the top, an 18 inch depth requires around 18,000 gallons.

## Factors That Affect Water Volume

When determining gallons needed, here are some key factors to consider:

• Average vs. maximum depth – Gallon capacity refers to completely filling the pool. But you generally only need to partially fill it.
• Using steps/benches – Built-in steps and benches displace water, so you may need a bit less.
• Surface area – More surface area means quicker evaporation losses, so larger pools may need more top-off water over time.
• Special features – Additional water features like waterfalls and fountains also use up volume.

Accounting for these factors will help you better estimate the operational water volume needed versus maximum capacity.

## Tips for Filling the Intex 10×30 Pool

When it’s time to fill your Intex 10×30 pool, keep these tips in mind:

• Mark the 18 inch fill line on the pool wall with chalk or tape measure.
• Place a hose in the deepest area, as the pool will overflow into shallower sections.
• Fill slowly to prevent stress and damage to the pool walls.
• Factor in a garden hose flow rate of about 5-10 gallons per minute.
• Monitor frequently to avoid overfilling.
• Consider using a pool fill calculator to estimate fill time based on hose flow rate.
• Make sure to treat the water as the pool fills.

With proper preparation and patience, filling the Intex 10×30 pool can be straightforward. Always follow manufacturer instructions to ensure safe setup.

## Maintaining Water Levels

Once filled, water levels will need to be monitored and maintained throughout the swimming season. Reasons you may need to add water include:

• Splashing and play – Kids jumping in and making waves can splash out a lot of water over time.
• Evaporation – Heat causes significant amounts of water to evaporate from the surface.
• Drainage – Periodic maintenance like cleaning may require draining some water out.
• Damage – Accidental rips or leaks will cause water loss.

To maintain proper levels, periodically check the water line on the interior walls and add water as necessary. An inexpensive water level float can also automatically monitor the height and notify you when topping off is needed.

## Estimating Initial Fill Cost

For budgeting purposes, it helps to estimate what the initial fill up will cost. Here’s a quick breakdown:

• Volume needed: ~18,000 gallons
• Average water rate: \$0.005/gallon (can vary based on location)
• Initial fill cost: 18,000 x \$0.005 = \$90

Based on average water rates, the initial fill up for the 10×30 pool is around \$90. The actual cost can be higher or lower depending on your local utility provider.

## Ongoing Water Costs

In addition to the initial fill, there are costs associated with maintaining the proper water level all season long. This includes topping off for splashing, evaporation, and the occasional partial drain. Total ongoing costs depend on several factors:

• How frequently water is added/changed
• How much needs to be refilled each time
• The rate you pay for water
• How long your swimming season lasts

For example, if you needed to add 1,000 gallons twice a week for 15 weeks at \$0.005/gallon, your ongoing costs would be:

• 1,000 gallons x 2 times/week x 15 weeks = 30,000 gallons total
• 30,000 gallons x \$0.005/gallon = \$150 in top-off costs

Proper pool maintenance and water conservation can help minimize how much and how often water needs to be refilled.

## Using a Pool Cover

One of the best ways to reduce water refill costs is by using a pool cover:

• Covers minimize evaporation losses when the pool is not being used.
• They protect against rainwater diluting chemical levels.
• Debris is kept out, reducing how often you need to drain and refill.

Pool covers are available in many shapes, sizes, and materials like vinyl, mesh, and solar. An affordable cover is a smart investment that can save hundreds of dollars in water expenses.

## Changing Water vs. Topping Off

In addition to adding water as needed, you may want to periodically drain and refill a portion of the pool water. Reasons to change some of the water include:

• Maintaining proper chemical balance
• Reducing buildup of contaminants
• Improving clarity if water becomes cloudy
• Lowering mineral concentration that occurs naturally over time

Many pool experts recommend changing out 25-30% of the water every month. With an 18,000 gallon 10×30 pool, that would equal 4,500 to 5,400 gallons monthly.

This helps refresh a portion of the water to keep the pool clean and balanced. Topping off is still needed for daily losses.

Top Off Water Change Out Water
Frequency As needed throughout season Monthly or as needed
Volume Lower amounts to maintain level 25-30% of total water
Purpose Replace water lost to evaporation, splashing, etc. Freshen water and dilute contaminants

Having a water top off plan along with periodic partial water changes makes for economical and efficient pool maintenance.

## Using Pool Water for Irrigation

An advantage of having a large backyard pool is that pool water can be used to help irrigate landscaping and gardens. When draining for maintenance or at the end of season, instead of just sending water down the drain, consider using it for irrigation purposes.

This recycled water is beneficial for plants for a few reasons:

• Contains nutrients like nitrogen and phosphorous from swimmer waste and chemicals.
• Warmed from the sun, so less temperature shock for plants.
• Often chlorinated, which kills harmful bacteria.

Certain crops like citrus trees, berries, grapes, and ornamentals tend to do well with diluted pool water. Just be sure to shut off any auto irrigation to avoid overwatering.

Reusing the water for your yard conserves an important resource while reducing pool costs. Though not drinkable, it can nourish gardens, lawns, and fruit trees if used safely.

## Closing Thoughts

When planning for pool season, determining the Intex 10×30 pool’s gallon capacity provides valuable insight for filling it properly and budgeting for water usage. While the pool can hold over 60,000 gallons total, plan on about 18,000 gallons for regular operation. Proper top off procedures and maintenance will keep water levels consistent and costs down.

Investing in a pool cover, changing out 25-30% of water monthly, and reusing it for irrigation are great ways to maximize this backyard asset while saving water and money over the long run.